Router Rip Versi 2

Sebelum :

 

Sesudah :

 

Lakukan Set router :

(Router 0) 

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Router1

Router1(config)#int fa0/0

Router1(config-if)#ip add 10.1.0.1 255.255.0.0

Router1(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router1(config-if)#exit

Router1(config)#int se2/0

Router1(config-if)#ip add 10.2.0.2 255.255.0.0

Router1(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router1(config-if)#exit

Router1(config)#router rip

Router1(config-router)#ver 2

Router1(config-router)#network 10.0.0.0

Router1(config-router)#exit

Router1(config)#^Z

Router1#

%SYS-5-CONFIG_I: Configured from console by console

Router1#wr mem

Building configuration...

[OK]

(Setting pada PC 0) 

IP : 10.1.0.0
SM : 255.255.255.0
DG : 10.1.0.1 

(Router 1)

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname router2

router2(config)#int se2/0

router2(config-if)#ip add 10.2.0.1 255.255.0.0

router2(config-if)#clock rate 64000

router2(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

router2(config-if)#exit

router2(config)#int se3/0

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

router2(config-if)#ip add 10.3.0.1 255.255.0.0

router2(config-if)#clock rate 64000

router2(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to down

router2(config-if)#exit

router2(config)#router rip

router2(config-router)#ver 2

router2(config-router)#network 10.0.0.0

router2(config-router)#exit

router2(config)#^Z

router2#

%SYS-5-CONFIG_I: Configured from console by console

router2#wr mem

Building configuration...

[OK]

(Router 2)

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Router3

Router3(config)#int fa0/0

Router3(config-if)#ip add 10.4.0.1 255.255.0.0

Router3(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router3(config-if)#exit

Router3(config)#int se3/0

Router3(config-if)#ip add 10.3.0.2 255.255.0.0

Router3(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router3(config-if)#exit

Router3(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router3(config)#^Z

Router3#

%SYS-5-CONFIG_I: Configured from console by console

Router3#wr mem

Building configuration...

[OK]

(Setting pada PC 1)

IP : 10.4.0.2
SM : 255.255.255.0
DG : 10.4.0.1

(Pembuktian)

TUGAS JARINGAN KOMPUTER 2 (RIP)

 

IP ROUTER 0

IP ROUTE LAB A

LAB_A(config)#ip route 219.17.100.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 199.6.13.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 223.8.151.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 204.204.7.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 210.93.105.0 255.255.255.0 201.100.11.2

LAB_A(config)#^Z

LAB_A#

%SYS-5-CONFIG_I: Configured from console by console

LAB_A#write mem

Building configuration...

[OK]

IP ROUTER 1

IP ROUTE LAB B

LAB_B(config)#ip route 205.7.5.0 255.255.255.0 201.100.11.1

LAB_B(config)#ip route 192.5.5.0 255.255.255.0 201.100.11.1

LAB_B(config)#ip route 223.8.151.0 255.255.255.0 199.6.13.2

LAB_B(config)#ip route 204.204.7.0 255.255.255.0 199.6.13.2

LAB_B(config)#ip route 210.93.105.0 255.255.255.0 199.6.13.2

LAB_B(config)#^Z

LAB_B#

%SYS-5-CONFIG_I: Configured from console by console

LAB_B#write mem

Building configuration...

[OK]

IP ROUTER 2

IP ROUTE LAB C

LAB_C(config)#ip route 219.17.100.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 201.100.11.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 192.5.5.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 205.7.5.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 210.93.105.0 255.255.255.0 204.204.7.2

LAB_C(config)#^Z

LAB_C#

%SYS-5-CONFIG_I: Configured from console by console

LAB_C#write mem

Building configuration...

[OK]

IP ROUTER 3

IP ROUTE LAB D

LAB_D(config)#ip route 223.8.151.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 199.6.13.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 219.17.100.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 201.100.11.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 192.5.5.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 205.7.5.0 255.255.255.0 204.204.7.1

LAB_D(config)#^Z

LAB_D#

%SYS-5-CONFIG_I: Configured from console by console

LAB_D#write mem

Building configuration...

[OK]

IP ROUTER 4

IP ROUTE LAB E

LAB_E(config)#ip route 204.204.7.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 223.8.151.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 199.6.13.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 219.17.100.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 201.100.11.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 192.5.5.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 205.7.5.0 255.255.255.0 210.93.105.1

           

LAB_E(config)#^Z

LAB_E#

%SYS-5-CONFIG_I: Configured from console by console

LAB_E#write mem

Building configuration...

[OK]

TUGAS JARINGAN KOMPUTER 2 :')

 Tunjukkan bahwa pc 1 dengan ip address 10.1.1.1 dan SM 255.255.0.0 dan pc 2 dengan ip address 10.1.1.1 dan SM 255.255.0.0 tidak replay dan beri alasannya !

 

 Gambar  : pc 1 dengan ip addressnya.

 

Gambar : pc 2 dengan ip addressnya.

 

Gambar : mengecek pc melalui pc 1

 

Gambar : mengecek pc melalui pc 2

   jadi, pc 1 dengan ip address 10.1.1.1 dan SM 255.255.0.0 tidak bisa connect dengan pc 2 yang ip addressnya 10.2.2.2 dan SM 255.255.0.0,,

karena untuk menentukan network berdasarkan subnet mask.

subnet mask tidak perlu diganti yang harus diganti adalah ip nya