Router Rip Versi 2

Sebelum :

 

Sesudah :

 

Lakukan Set router :

(Router 0) 

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Router1

Router1(config)#int fa0/0

Router1(config-if)#ip add 10.1.0.1 255.255.0.0

Router1(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router1(config-if)#exit

Router1(config)#int se2/0

Router1(config-if)#ip add 10.2.0.2 255.255.0.0

Router1(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router1(config-if)#exit

Router1(config)#router rip

Router1(config-router)#ver 2

Router1(config-router)#network 10.0.0.0

Router1(config-router)#exit

Router1(config)#^Z

Router1#

%SYS-5-CONFIG_I: Configured from console by console

Router1#wr mem

Building configuration...

[OK]

(Setting pada PC 0) 

IP : 10.1.0.0
SM : 255.255.255.0
DG : 10.1.0.1 

(Router 1)

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname router2

router2(config)#int se2/0

router2(config-if)#ip add 10.2.0.1 255.255.0.0

router2(config-if)#clock rate 64000

router2(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

router2(config-if)#exit

router2(config)#int se3/0

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

router2(config-if)#ip add 10.3.0.1 255.255.0.0

router2(config-if)#clock rate 64000

router2(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to down

router2(config-if)#exit

router2(config)#router rip

router2(config-router)#ver 2

router2(config-router)#network 10.0.0.0

router2(config-router)#exit

router2(config)#^Z

router2#

%SYS-5-CONFIG_I: Configured from console by console

router2#wr mem

Building configuration...

[OK]

(Router 2)

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname Router3

Router3(config)#int fa0/0

Router3(config-if)#ip add 10.4.0.1 255.255.0.0

Router3(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router3(config-if)#exit

Router3(config)#int se3/0

Router3(config-if)#ip add 10.3.0.2 255.255.0.0

Router3(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router3(config-if)#exit

Router3(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router3(config)#^Z

Router3#

%SYS-5-CONFIG_I: Configured from console by console

Router3#wr mem

Building configuration...

[OK]

(Setting pada PC 1)

IP : 10.4.0.2
SM : 255.255.255.0
DG : 10.4.0.1

(Pembuktian)